How water ionizer works
It is possible to build a water ionizer at your own dwelling, but you have to know the basic first before you start the project. First thing you have to know is the water quality of your tap water. For that purpose, you have got to take sample ( several liters ) of your tap water and have it analyzed on the certified water laboratory. After getting the result, what you will need to know is the dissolved oxygen ( DO ) value and the pH.
The point of water ionizer is to produce water that’s able to make your body filled up with oxygen and neutralise acidic condition inside your body.
The purpose to build a water ionizer is obvious. You guarantee yourself to get clean water, free from waterborne contaminants that might be found on your tap water.
The basic principle on how to build a water ionizer is to put electrodes, positive and negative electrodes, inside the water on separated chamber. Once the power is turned on, the ionization process takes place. Alkaline water is for drinking purposes while the acidic water is for sterilizing, cleaning, or disinfecting process.
The common electrode used is titanium, but you can always change it to other metals that are good conductors like silver, aluminum, and copper. Copper and aluminum are the most often used, many of us and corporations favor use them. Or simply visit Aviva Water to view the range
For more information visit http://ioniseredwater74.ning.com/profiles/blogs/how-water-ionizer-works
By: Fredrick Mullen
The point of water ionizer is to produce water that’s able to make your body filled up with oxygen and neutralise acidic condition inside your body.
The purpose to build a water ionizer is obvious. You guarantee yourself to get clean water, free from waterborne contaminants that might be found on your tap water.
The basic principle on how to build a water ionizer is to put electrodes, positive and negative electrodes, inside the water on separated chamber. Once the power is turned on, the ionization process takes place. Alkaline water is for drinking purposes while the acidic water is for sterilizing, cleaning, or disinfecting process.
The common electrode used is titanium, but you can always change it to other metals that are good conductors like silver, aluminum, and copper. Copper and aluminum are the most often used, many of us and corporations favor use them. Or simply visit Aviva Water to view the range
For more information visit http://ioniseredwater74.ning.com/profiles/blogs/how-water-ionizer-works
By: Fredrick Mullen
Make your own water ionizer
It is possible to build a water ionizer at your own dwelling, but you’ve got to know the basic first before you start the project. First thing you’ve got to know is the water quality of your tap water. For that purpose, you have got to take sample ( several liters ) of your tap water and have it researched on the certified water lab. After getting the result, what you may wish to know is the dissolved oxygen ( DO ) worth and the pH.
The purpose of water ionizer is to produce water that is ready to make your body filled up with oxygen and neutralize acidic condition inside your body. If the tap water already contains enough oxygen ( dissolved oxygen ) and be alkaline already, there’s no point for making your own ionizer device.
The purpose to build a water ionizer is obvious. You ensure yourself to get clean water, free from waterborne pollutants that might be found on your tap water. By making your own water ionizer, you will get benefits of ionized water while not having to pay money just like if you have to pay the commercial one.
The basic principle on how to build a water ionizer is to put electrodes, positive and negative electrodes, inside the water on separated chamber. These electrodes are connected with 12V or 24V power source via alligator clips.
It is always better before you build a water ionizer to have consulted first with the expert in it so you don’t waste your money.
Or simply visit Aviva Water to view the range
For more information visit ** Article must be manually approved before URL is available **
By: Fredrick Mullen
The purpose of water ionizer is to produce water that is ready to make your body filled up with oxygen and neutralize acidic condition inside your body. If the tap water already contains enough oxygen ( dissolved oxygen ) and be alkaline already, there’s no point for making your own ionizer device.
The purpose to build a water ionizer is obvious. You ensure yourself to get clean water, free from waterborne pollutants that might be found on your tap water. By making your own water ionizer, you will get benefits of ionized water while not having to pay money just like if you have to pay the commercial one.
The basic principle on how to build a water ionizer is to put electrodes, positive and negative electrodes, inside the water on separated chamber. These electrodes are connected with 12V or 24V power source via alligator clips.
It is always better before you build a water ionizer to have consulted first with the expert in it so you don’t waste your money.
Or simply visit Aviva Water to view the range
For more information visit ** Article must be manually approved before URL is available **
By: Fredrick Mullen